Northfield is about 94 miles in a straight line from our only base at Brent Cross, NW2 (further by road). We have no base or van stationed nearby. Call and we will tell you straight away whether we can take the job; if we can, the arrival time is given on the call.
If the locking wheel nut key is lost or the nut is damaged, the wheel cannot come off with normal tools. We remove the locking nut at the car with specialist removal tools, taking care to protect the alloy, then refit the wheel with a standard wheel nut so it can be removed in future.
If the tyre also needs a repair or a new tyre, tell us on the call so it can be done in the same visit. Before booking, check the glovebox, the boot and the spare wheel well for the key. A locking wheel nut is a security device, so we may ask for proof that the car is yours or in your care.
The nut is removed where the car is parked, on firm, level ground: a driveway, a legal space on a quiet street, or a car park where the owner allows it.
| What | Detail |
|---|---|
| Postcode districts | B31 |
The price depends on how many locking nuts need removing, plus any tyre work. It is confirmed on the call before anyone sets off, and it does not change in the evening or at the weekend.
Most cars with locking wheel nuts have one on each wheel, with a patterned head that only its matching key will turn. The key is a small socket that fits between the nut and the wheel brace. Without it the wheel cannot come off, so a lost or broken key turns a simple puncture into a bigger job.
Each key has a code, usually on a small card that came with the car or stamped on the key itself. With the code, a replacement key can often be ordered from a dealer or the lock maker, which is worth doing if the wheel does not need to come off urgently.
A nut can also be damaged: the pattern rounds off when the wrong tool or an impact gun is used, or the key snaps inside the nut. In those cases the key would not help even if it turned up, and the nut has to be removed.
Every wheel nut is tightened to the maker's setting with a torque wrench. It is good practice to have the nuts checked again after the first short drive following any wheel work, as alloy wheels can settle slightly.
If you want locking nuts again, a new set can be fitted later. Keep the new key in the glovebox and note the key code somewhere outside the car, such as on your phone, so a replacement key can be ordered if it goes missing.
Tell us whether the key is lost, broken or rounded off. A clear photo of one of the nuts helps.
You hear what the job involves and the options for your car. Nothing is booked until you say yes.
The fitter comes to your home, your workplace or a safe place to park, raises the car on a jack and does the job beside it.
Before the fitter leaves, the wheel is checked for security and the tyre pressure is set to the maker's figure.
If the key turns up but does not fit, or it slips on the nut, stop rather than force it: a rounded nut is harder to remove.
The previous owner, or the dealer that sold the car, may still have the key or its code, so a call to them can be worth it if the wheel can wait.
Have these ready when you call:
There is no fixed figure that suits every car, so the price is built from a few things and told to you before you decide.
The price is the same at any hour. Asking for a price does not commit you to anything.
When you compare prices, compare like with like: the same brand and pattern, the same load index and speed rating, and whether balancing and a new valve are part of the job.
“A pleasure having them come down and save me. Big shout out to Hiwad, really responsive, recommend him to anybody.”
“From start to finish, Hiwad was incredibly professional and helpful.”
“Good and reliable service in all conditions.”
These are the neighbourhoods, postcode districts and main roads on record for this area. Whether we can take a particular job depends on the diary and the distance from our base, so the call always decides.
Yes, if the site allows it. Supermarket, retail park and station car parks are private ground, so the owner's permission comes first. Places of this kind in this area include:
What a tyre fitter checks during a fitting
A good tyre fitting is more than swapping rubber. Here's what a proper fitter checks, from the wheel and valve to balancing and torque, and why it matters.
What to keep in the car for a tyre emergency
Most cars carry the wrong things for a puncture. Here is the short list that helps at the roadside, and what to check you have now.
Wheel balancing vs alignment: what's the difference?
Balancing and alignment are often confused but are two different jobs. Here's what each does, how to tell which you need, and when to have them done.
Tell us the make, model and registration, and whether you have the key code card. The price is given on the call.
